Earphone sockets that have not been used for a long time are hung at will and covered with dust... Many families have such plugs and earphone sockets that appear "untidy" because they have not been cleaned for a long time. They seem to have nothing to do with safety, but they actually hide dangers.
When the plug and earphone socket are not used or cleaned up for a long time, some dust and hair will gradually accumulate between the north and south poles of the plug and the jack of the earphone socket. Once these dust and hair encounter moisture, they are likely to become conductors, making a circuit between the north and South poles of the power supply, forming a power on condition. This power on phenomenon is called "dirt accumulation and conduction". "Dirt accumulation and conduction" will cause poor circuit contact, severe will also cause local heating, resulting in the deformation of the insulating resin of the plug and earphone socket, resulting in short circuit and fire.
The fire department reminds the general public that in a dry environment, plugs and earphone sockets should often be scrubbed and cleaned with a dry cloth to avoid dust accumulation; Earphone sockets with waterproof covers shall be used in places with more water vapor and oil fume, such as bathhouses, toilets and kitchens; Regularly use a vacuum cleaner to suck out the dust in the drag line board, or turn the drag line board upside down, tap the bottom quietly, and then wipe the dust on the surface with a dry cloth; Don't forget to cover the earphone socket when you cover the electrical appliances that you don't need for a long time; Unnecessary drag line boards shall be put into the cabinet and kept properly to avoid ash accumulation; Unplug the plug you don't need for a long time, which can save money and be safe. Headphone socket doubt can not be ignored!
Earphone socket is a functional electronic switch, which is a standard part. When in use, the switch can be turned on by quietly pressing the switch button. When the hand is released, the switch will be turned off. The internal structure of the earphone socket is that the quasi metal shrapnel bounces to complete the on-off. Earphone socket has been widely used in electrical equipment because of its small contact resistance, bright hand feeling when pressed, obvious hand feeling and complete height standard. Especially on solar lamps. Compared with the commonly used earphone socket.