As a basic and important component in electronic products, earphone socket also needs attention in the process of daily use to avoid loss. Now let's learn about the matters needing attention in the application of headphone socket with Xinxun electronics.
1. Never touch the earphone socket with wet hands in daily use, otherwise there will be hidden danger of electric shock to human body, which needs special attention.
2. When the earphone socket is not in use, it is recommended to cover the dust cover, otherwise the coating on the earphone surface will be oxidized after contacting with air for a long time, resulting in poor contact between the earphone socket and the plug.
3. At present, the distinguishing standards of earphone socket include 2.5mm and 3.5mm, which should be selected according to the requirements of the equipment. Because the application requirements of earphone socket equipment of different standards will be different, some equipment are not compatible with the application of 2.5mm standard earphone socket. If it is forced to use, the earphone socket will be damaged, so it is also necessary to pay attention to this point in use.
4. The insulation resistance of the earphone socket should generally be greater than or equal to 100m Ω. The insulation resistance refers to the resistance between the conductors of the earphone socket that are not in contact. If it is less than 100m Ω, the resistance between the conductors will not be able to bear the normal current, and then it will cause loss to the earphone socket.
5. If the earphone socket is found to have abnormal sound or burnt smell, the power supply shall be cut off immediately for maintenance. Avoid some security incidents.
6. Do not exceed the specified maximum rated current in the earphone socket working room, otherwise the components inside the earphone socket will accelerate aging, which may lead to silent state during operation, or even damage the earphone socket or other parts.
7. When the line is connected, the resistance between the two contact conductors of the earphone socket is called touch resistance. Generally, the touch resistance of the earphone socket should not exceed 0.03 Ω.
8. The electrical strength of the earphone socket shall generally be greater than ac500c. Its electrical strength is also called withstand voltage, which refers to the voltage that can be accepted by the conductor touched by the earphone socket. If the withstand voltage is less than ac500c, the conductor between earphone sockets will not be able to bear the load when the equipment is working, so the earphone socket will be burned out.
9. During the daily use of the earphone socket, the plugging force used when the plug is inserted into the earphone socket should not be too large, because it may damage the transmission chip inside the earphone socket.
10. Pay special attention to the treatment of earphone socket during welding. Because the earphone socket is generally sensitive to heat source, do not touch the head of the electric soldering iron on the pin of the earphone socket for a long time. Secondly, the power of the electric soldering iron should generally not exceed 30W. At this time, solder should be filled. The function of solder is to remove the oxide film on the template of the circuit board and the wire when the earphone socket is welded.